پکیج استاندارد ASTM بخش 14 (Volume 14)
Section 14 - General Methods and Instrumentation
شامل بیش از 470 نسخه استاندارد تا سال 2016
این استانداردها عمدتا سری E و برخی دیگر سری G هستند
پکیج استاندارد ASTM بخش 14 (Volume 14)
پکیج استاندارد ASTM بخش 14 (Volume 14)
Section 14 - General Methods and Instrumentation
شامل بیش از 470 نسخه استاندارد تا سال 2016
این استانداردها عمدتا سری E و برخی دیگر سری G هستند
در اینجا دانلود استاندارد ASTM D 1143 اندازه گیری بار تراکم محوری شمعها بصورت فایل PDF در 11 صفحه با کیفیت بالا قرار داده شده است.
Standard Test Method for
Piles Under Static Axial Compressive Load
This standard has been prepared to cover routine methods of testing to determine if a pile has adequate bearing capacity. The provisions permit the introduction of more detailed requirements and procedures when required to satisfy the objectives of the test program. While the procedures herein produce a relationship between applied load and pile settlement, the results may not represent long-term performance
Scope *
This test method covers procedures for testing vertical or batter piles individually or groups of vertical piles to determine response of the pile or pile group to a static compressive load applied axially to the pile or piles within the group. This test method is applicable to all deep foundation units that function in a manner similar to piles regardless of their method of installation. This test method is divided into the following sections
234 صفحه pdf
STP 932:1986
Hazard Communication issues and implementation
Brower JE
Standard Test Method for
Sound Absorption and Sound Absorption Coefficients by
the Reverberation Room Method
فایل PDF استاندارد انجام آزمایش برجای پرسیومتر ی بر اساس استاندارد ASTM D 4719 در 9 صفحه.
Standard Test Method for
Prebored Pressuremeter Testing in Soils1
Scope: This test method covers pressuremeter testing of soils.
pressuremeter test is an in situ stress-strain test performed on
the wall of a borehole using a cylindrical probe that is
expanded radially. To obtain viable test results, disturbance to
the borehole wall must be minimized